How to Enter FTA Satellite Receiver Keys
View PDF | Print View
by: R.C. Ricci
Total views: 11
Word Count: 1754
How to Enter FTA Satellite Receiver Keys
This document explains the process of updating free to air receiver keys. In most cases, free to air satellite receivers to do have the controls for inputting new decryption keys.
As previously explained here, satellite television operates on the principal of locked (scrambled) signals. These signals require a key to unlock (unscramble) them. The keys used to unlock scrambled signals change very frequently. Satellite television subscribers need not worry about keys or entering in codes, however those using free to air satellite receiver boxes have to contend with ever changing keys. To complicate matters, changing the keys is not as easy as it seems. It is easy - the second time around. The first time requires a small investment of your time. The problems are basically, navigation within the receiver, where to actually change the keys, and of course where to get the current keys. (www.freekeys.info) has you covered for all of this. Just don’t forget to bookmark us! Better, subscribe to our RSS feed for the latest hourly updates!
FTA receivers have minimal controls on the set top box itself, and changing decryption keys requires usage of the remote control. There are many different types of fta satellite receivers, with absolutely no common ground between them. Remotes are all different, and on screen displays within the set top receiver are also varied. Fortunately, each receiver has an onscreen legend to help.
The first problem - how do you actually navigate to the menus to change the keys? (read below for instructions)
The second problem is where are the letter buttons? Each remote has typically numbers 0 to 9. Letters can be found onscreen, in the legend at the bottom of the onscreen menu.
Ariza
1. Press the green button
2. Press the red button
3. Press the red button
4. Press the menu button
5. Press the right arrow button several times to navigate, select Nagravision
6. Scroll down until to have the keys to be changed (this depends on which key is active)
Example: On 10/01/07 key 01 is active. Scroll down to provider ID 000101 key,
line 01, and enter xx xx xx xx xx xx xx xx (enter numbers with your # button on your
remote. Enter letters using the on screen legend
7. Press and hold OK button for 5 seconds.
8. Exit, exit
Ariza 700
1. Press the Menu button
2. Scroll Down to Parental Control, Press Enter
3. Press "i" key on remote, then enter the pin number "2004"
4. Scroll down to Set Default Key, Press Enter
5. Scroll up to Nagravision, Press Enter
6. Press VOL Right twice, you will see DISH Network
7. Press CH Down once, then VOL Right Twice, you will now see Nagravision 2
displayed on the top left. You are now at the key 00, Press CH Down once so you can edit the Key Data
8. Enter your new keys (write down the old ones to be safe)
9. Press Ok to store and then repeat with key 01
10. Press exit until you get back to tv, all channels will be available
Ariza Extreme
1. Press “Menu” on the remote
2. Press the right arrow button to select “Expert” with remote.
3. Press “1-2-3-4” quickly on the remote. This will bring you into the “CAS system”
Menu. This is where you enter or change data for all services you wish to test.
4. Using the arrow keys to navigate, move to the appropriate index for the desired provider, and then to the key selection. Press “OK” on the remote.
5. Use the arrow keys on remote to change the values for the desired provider and keys.
6. Using your remote, select and change the “key 00 data” with the new keys, then press “exit” on remote to store your changes.
7. Repeat step 6, select and change to the “key 01 data” using the same method described for changing key 00. Repeat steps 4 -6 substituting the key 01 index and key line and correct data for key 01. Enter the new 01 keys and then select “exit” on the remote to store your changes.
8. Press “exit” on remote until you reach view mode, then wait approx 15 seconds and your receiver should begin to process correctly again, allowing you to view video again until the next change. You must then obtain current/new data and repeat this process over again substituting the new updated data.
8a. If after completing all listed steps you still fail to receive video , then review all
data as entered as well as all setup and installation settings ensuring they are
correct and you are receiving signal from the correct satellite/s.
Buzz
1. Hit the “Menu” button.
2. Then scroll down to “Entertainment” and hit the “OK” button.
3. Then scroll down and highlight “Sokoban” then press 7890.
4. You should then see “Code” appear and be flashing. Highlight it and Press “OK.”
5. Then scroll down to Nagravision .
6. Move to Dish and make sure it is 0101 for dish and for BEV 0901.
7. Enter the first half of Key 86 (Key 00) in line 10.
8. Then enter the second half of Key 86 (Key 01) in line 11.
9. Then Enter the first half of Key 96 (Key 01) in line 20.
10. Then Enter the second half of Key 96 (Key 01) in line 21.
11. Then Exit out.
12. Change channel and watch TV
CaptiveWorks CW600s
Part 1: Switch off autoroll.
A. Go to Menu.
B. Go To System Setting.
C. Go To OSD.
D. Go down to Autoroll option and switch it to OFF.
E. Exit out to Menu
Part 2: Entering Keys Manually
A. Go to Menu.
B. Go To Accessories.
C. Go down to Key Menu.
D. Press Left Arrow Once to show "NAGRA2" on top of screen.
BEV :
Go down to 00 09 01 section 80 is Key 00, or Key 86.
Press Green Button. Enter new Key 00/86 there.
Go down to 00 09 01 section 90 is Key 01, or Key 96.
Press Green Button. Enter new Key 01/96 there.
DishNetwork:
Go down to 00 01 01 section 80 is Key 00, or 86.
Press Green Button. Enter Key 00/86 there.
Go down to 00 01 01 section 90 is Key 01, or 96.
Press Green Button. Enter Key 01/96 there.
Now, be sure to save any changes that you need to.
Exit out and watch TV.
Conaxsat CNX V1
1. Hit the “Menu” button and Press “9999.”
2. Then, go to Key Manager and press “OK.”
3. Next, go to System, and press “OK.”
4. Then, to Provider, and press “OK.”
5. Next, to Key Index, and press “OK.”
6. Then, go down to the appropriate field and hit “OK.”
7. Use your Arrow Buttons on the Remote to navigate and enter codes.
Once at stage 6 above... You can also use direct key entry. Here is how:
Use the numeric keypad and if you need to toggle between Alpha and Numeric
entries, each time you need the change, just press the Red RCU button. It's much
faster than arrowing around... once you get the hang of it.
Alphabetic Numbers:
1 =A
2 =B
3 =C
4 =D
5 =E
6 =F
Coolsat
1. Enter 8282 on your remote, or you can use the “Mute” button on your remote and then hit the “Exit” button.
2. Then Making sure that you have the very top box says 1 Nagravision for Dish Net, or 2 Nagravision for BEV .
3. To enter your keys, you can use the numbers on the number pad, and the info button to change letters. Hit the Info button until you get the letter you want, then hit the Right Arrow to change slots.
4. Or, you can hit the OK button and a new menu will pop up. Just use your arrows to select the numbers and letters you want and hit the OK button after each one. (Hit the exit button one time to get out of the little pop up screen.)
5. Now scroll down to the data in line 10. Enter the first half of KEY 86 (or Key 00)
in this line.
6. The go to line 11 and enter the second half of Key 86 (or Key 00) in this line.
7. Then go to line 20 and enter the first half of Key 96 (or Key 01) in this line.
8. Next go to line 21 and enter the second half of Key 96 (or Key 01) in this line.
9. Now hit the Exit button.
10. When the next screen pops up asking if you want to save changes, Use your
arrows and select “Yes” and hit the “OK” button.
11. Now, change your channel, and watch TV.
Digiwave
1. Press MENU
2. Scroll down to System Setting.
3. Press OK. If you see a red dot in the botton/left of your screen, go to step 5
4. Enter number 1004. A red dot will come out at your bottom left. YOU DO NOT NEED TO DO THIS STEP w/ latest bins.
5. Press red button (audio).
6. Press right arrow until NAGRA appears in the first line.
7. Down arrow up to Provider and right arrow up to 0001.
8. Now scroll down to first key line and press OK. scroll to the letters and number and enter Key 00.
9. Scroll down to second key line, press ok. and enter key 01
10. Scroll To Save Key and
11. Press OK.
12. Exit and Enjoy
Dreambox 500
1. Open up Dreambox Control Center, select FTP.
2. Then on left hand side of display double click on var.
3. Then double click on keys, then right click on keylist, and select Edit.
4. Go to the lines which looks like this:
N 0101 01 BXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 1409-
2005
N 0001 01 BXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 1409-
2005
where BXXXXXXXXXXXXXXXXXXXXXXXXXXX is the old key number, and
change it to look like this:
N 0101 00 FXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; Key update: 07-112005
N 0001 01 FXX
About the Author
http;//www.freekeys.info
Rating: Not yet rated
